浅谈创建节约型油库

介绍了中国石化江苏盐城石油分公司新兴油库创建节约型油库活动的经验和取得的较好的经济效益。他们的做法是：高度重视，提高全员创建思想意识。充分发挥员工的积极作用；细化措施，努力挖掘降本增效空间；强化监控，建立健全长效管理机制。     

加油站油品防盗的措施

为防止加油站油品被盗，应采取加强夜间值班管理、加强油品的计量管理和加强安全管理的高科技建设三项措施。     

空气钻井技术在普光气田的应用

普光气田是四川盆地已发现的最大天然气田。普光气田已钻井实践表明,常规钻井液钻井技术机械钻速低,钻井周期长,钻井复杂及事故多,无法满足普光气田开发要求。为了提高钻井速度,缩短钻井周期,加快普光气田的开发进程,在PD-1井、P2-2井、PA-2井、P4-2井、P6-3井等5口井进行了空气钻井试验。文中分析了普光气田进行空气钻井的可行性,介绍了空气钻井技术在普光气田的实践情况,并对空气钻井的效果进行了评价,分析了空气钻井技术在普光气田进一步应用需要重视和解决的问题,并提出了今后的研究方向。     

Attribute Allocation and Retrieval Scheme for Large-Scale Sensor Networks

Wireless sensor network is an emerging technology that enables remote monitoring of large geographical regions. In this paper, we address the problem of distributing attributes over such a large-scale sensor network so that the cost of data retrieval is minimized. The proposed scheme is a data-centric storage scheme where the attributes are distributed over the network depending on the correlations between them. The problem addressed here is similar to the Allocation Problem of distributed databases. In this paper, we have defined the Allocation Problem in the context of sensor networks and have proposed a scheme for finding a good distribution of attributes to the sensor network. We also propose an architecture for query processing given such a distribution of attributes. We analytically determine the conditions under which the proposed architecture is beneficial and present simulation results to demonstrate the same. To the best of our knowledge, this is the first attempt to determine an allocation of attributes over a sensor network based on the correlations between attributes.     

浅谈土石坝安全鉴定工程地质勘察的几点体会

针对在土石坝的安全鉴定勘察过程中,往往会遇到诸如周期短、经费有限,试验、取样困难,试验参数的选取复杂等问题,指出应经济合理地布置勘探工作、事前制定详细完善的计划、综合分析各种参数等措施才能使安全鉴定勘察工作圆满完成.     

水资源系统分析法在水资源优化配置中的应用

探讨了水资源系统分析法的步骤和数学模型,并以线性规划模型为例建立了水资源优化配置的数学模型,对水资源优化配置提供了一定的依据。     

Formulation of a ceramic ink for a wide-array drop-on-demand ink-jet printer

This paper describes the methodology for simulating a reprographic ink with a ceramic ink based on a commercially available zirconia powder for direct ceramic ink-jet printing. Of over-riding importance was matching viscosity and this was tested systematically by using a mineral oil–hexane binary system. Of secondary importance was adjustment of the pressure defect behind the nozzle to compensate for small differences in surface tension. The inks tested in the wide array print-head were based on low electrical conductivity liquids to avoid damage to the electroding system. The organic binder for the zirconia ink was paraffin wax and the dispersant was a hydroxystearic acid based polyester.     

一种平面结构的V波段上变频器

介绍了平面结构的V波段变频器，该变频器采用平衡变频结构，变频电路主体为平面结构，同时采用了E面探针结构的波导微带转换作为射频信号输出，文中给出了该上变频器的电路软件仿真结果和实测结果以及E面探针波导微带转换的仿真和测试结果，最后给出了该上变频器的实物结构。     

Sparse field level set method for non-convex Hamiltonians in 3D plasma etching profile simulations

Level set method [S. Osher, J. Sethian, J. Comput. Phys. 79 (1988) 12] is a highly robust and accurate computational technique for tracking moving interfaces in various application domains. It originates from the idea to view the moving front as a particular level set of a higher dimensional function, so the topological merging and breaking, sharp gradients and cusps can form naturally, and the effects of curvature can be easily incorporated. The resulting equations, describing interface surface evolution, are of Hamilton-Jacobi type and they are solved using techniques developed for hyperbolic equations. In this paper we describe an extension of the sparse field method for solving level set equations in the case of non-convex Hamiltonians, which are common in the simulations of the profile surface evolution during plasma etching and deposition processes. Sparse field method itself, developed by Whitaker [R. Whitaker, Internat. J. Comput. Vision 29 (3) (1998) 203] and broadly used in image processing community, is an alternative to the usual combination of narrow band and fast marching procedures for the computationally effective solving of level set equations. The developed procedure is applied to the simulations of 3D feature profile surface evolution during plasma etching process, that include the effects of ion enhanced chemical etching and physical sputtering, which are the primary causes of the Hamiltonian non-convexity.